Routinewartung der Baggerschaufel

Als Baumaschine, Die excavator bucket is a very important contributor to the construction site, and its normal operation is of vital importance to the construction progress of the site. So, in order to ensure that the excavator bucket can operate stably for a long time, how to do the routine maintenance of the excavator bucket? Below, Xuzhou Rainbow Machinery and Equipment Co., Ltd the following suggestions are given to address this issue:

1, cleaning the bucket
After each construction, the bucket must be cleaned to keep it clean. Because the bucket is often in contact with hard materials such as soil and stones, it is inevitable that there will be some hard wounds or dirt. If the bucket is not cleaned in time, these hard wounds or dirt will seriously affect the service life of the bucket. When cleaning, first remove the dirt and other debris from the bucket, then rinse the bucket thoroughly with water, and you can add a small amount of cleaning agent to make the bucket cleaner.
2, keep lubrication
The excavator bucket uses a hydraulic system to work, and the various internal parts must be kept lubricated. Because the wear and friction of these parts will affect the normal use of the excavator, so lubrication is very important. Every day before use, you need to check various lubrication points to see if you need to refuel and whether the oil is sufficient, and also pay attention to the type and quality of hydraulic oil to avoid using unsuitable lubricants.
3, regularly check the teeth of the digging bucket
The teeth of the bucket are the key parts of the excavator used to cut the underground soil and materials, and even the hardest soil has nothing to hide under their sharpness. Therefore, the state of the teeth directly affects the operational efficiency and effectiveness of the excavator. So in the usual maintenance, Die
4, to prevent excessive load on the excavator bucket
Once the bucket is overloaded, it will cause serious wear and damage to the accessories, thus shortening the service life of the bucket. Therefore, in the process of using the bucket, full consideration needs to be given to the construction requirements, the hardness of the soil, and the depth of sinking. When the soil hardness is high and the sinkage depth is deep, the construction speed should be reduced and the digging depth should be reduced to avoid overloading the bucket as much as possible.
5. Maintain the hygiene of the working area
In the process of excavator bucket work, always pay attention to keep the hygiene of the construction area. Try to avoid the dust and debris in the construction area from entering the bucket, so as to avoid damage to the working machine and pollution and harm to the environment.
The above points are the basic suggestions for the daily maintenance of excavator bucket. If you can pay attention to them consciously during the daily maintenance, you can ensure the normal work of excavator bucket and improve the efficiency of construction, and also contribute to the safety and security of people’s life.