Excavator ontzi hortzak dituen indusketa osagarri moduko bat da

An excavator bucket is an excavation accessory with teeth that can be fixed to the excavator equipment arm. The bucket is operated by the excavator operator using a control panel in the engine compartment. There are different types of excavator buckets, depending on where the excavation is to be carried out.

Excavator buckets can also be used to move soil or to carry dump trucks for easy transport to dumping addresses. Excavators are used for the basic trenching method for laying pipelines, and for digging test pits for geological engineering investigations.
Excavator Bucket Encyclopedia Dictionary of Excavator Buckets
There are different types of excavator buckets.
Kuboak – this is a standard accessory for every excavator equipment, which is commonly used. They have sharp, blunt teeth and are ideal for digging subsoil.
Rock shovel – This type of shovel is similar to the excavator shovel, but the structure has been partially reinforced by the structure. This also allows the bucket to facilitate with more energy and get rid of solid rock without destroying itself. They have long, sharp teeth and a narrow V-shaped cutting edge.
V-shaped buckets-These buckets are particularly suitable for digging V-shaped pipe trenches for assembling utility cable lines and pipelines that must be installed in shallow sections.
Riddle bucket-This type of bucket is made of heavy metal sheets with voids to allow smaller particles to fall down. Ideal for separating out coarse soil layers and fine particles.
Flat ground or removal buckets – These buckets do not have teeth, but have a higher volume than other buckets. They are used to scoop up soft base material and… They are used for skewing, leveling and backfilling.
Hard pan scrapers – These scrapers are made for maximum strength and durability and are similar to rock scrapers. The difference is the tearing teeth that are attached to the back of the bucket to loosen the compacted soil while digging.