L’usure du godet de la pelle et la température élevée de l’eau provoquent une analyse et des solutions

“Seau” as an important part of the excavator, in the use of the process requires extra attention, bucket water temperature is also a lot of friends often encountered problems, and then analyze and explain.
First is the selection. To choose different models of buckets according to different objects, different models of buckets using different raw materials, not the same production process, for different mining objects, such as soft sand and hard granite applied to the bucket is not the same.

In the use of excavators for digging, we need to timely maintenance and care of the bucket, because this part of the need for a long time to contact with materials, it is easy because of some of the water or corrosive materials and damage, especially the bucket edge parts are more susceptible to wear and tear, so every day to carry out the perfect care. If the bucket blade after long-term use has become dull and reduce the effect, then the operators also need to pay attention to the bucket blade in a timely manner to re-treat, generally can be the entire bucket blade using a specialized industrial sharpening stone to resharpen the edge.
For the bucket water temperature is high, the bucket work process will have a lot of debris dust into the engine around, because, regular check to clean up the machine around the debris can be conducive to reduce the engine water temperature. Check whether the cooling fan is working properly, whether the drive belt is loose, whether the front of the cooler is blocked by debris cover. En outre, too much oil on the surface of the engine will also affect the heat dissipation.
Digging bucket failure do not be anxious, careful inspection, and timely maintenance, most of the faults will be solved!

Source products for this article：Godet d'excavatrice